Model F4222

up to 635 kg

Single point load cell

Typical single point load cell designed for the high accuracy for 0.025 % of full scale and the use in platform scales. The model F4222 series can be used for weighing as well as to measure static compression and tension forces. It is available for a range of nominal loads between 30 and 635 kg.


  • For the construction of platform scales up to 600 x 600 mm
  • Typical design
  • Combined error 0.025 % full scale
  • Nominal loads starting at 30 kg
  • Made of aluminium
  • Protection class IP 65
Measuring Ranges

0...30 kg up to 0...635 kg


Constructed for the use in platform scales single point load cell suit to eccentric load introduction. They can be mounted under the platform without any further construction or calibration processes. Besides this the model F4222 series can be utilized in a wide range of applications. The reasonable priced single point load cells combine a high accuracy with a simple installation. The mounting is done by using the fastening threads on the cable side. The force is applied on the opposite side vertically to the axis of load cell, either through the threads or by the mounted platform. The model F4222 series are made of aluminium. High grade plastic covers the strain gauges. Because of this they suit for the use in harsh environments.